Product Mounting Diagram; Lens Tubes - Chauvet Professional OVATION E-910FC IP Guía De Referencia Rápida

Ocultar thumbs Ver también para OVATION E-910FC IP:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

EN
Mounting
Before mounting this product, read the
mounting clamps are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to
http://trusst.com/productcategory/truss-clamps/.

Product Mounting Diagram

Lens Tubes

The following lens tubes are available for purchase:
19°, 26°, 36°, and 50° w/Gel frame (6.25 in/159 mm accessories)
14°, 15°–30°, and 25°–50° Zoom Gel frame (7.5 in/191 mm accessories)
Passcode
After being prompted, enter the following passcode by pressing:
<UP>, <DOWN>, <UP>, <DOWN>, <ENTER>
This passcode cannot be changed and must be used whenever prompted.
3
QUICK REFERENCE GUIDE
Safety
Notes. Use at least one mounting point per product. Make sure the
Ovation GR-1 IP
power/signal output
Overhead Mounting
Mounting clamp
Safety cable
Secure the safety cable using
the passageway on the top of
the product
Alternate yoke
attachment
Ovation E-910FC IP QRG Rev. 5

Publicidad

Tabla de contenido
loading

Tabla de contenido