Remote Control - Brigmton BAP 900 Manual De Instrucciones

12. MIC PRIORITY: Connect the microphone, briefly press the button in
microphone priority mode
13. LINE IN: Connector external sound sources.
14. Volume of the Microphone volume
15. Reverberation: Regulation of the reverb of the.
16. Microphone input jack.
17. DC 12V charging port.
18. It allows to control the light switch.
19. Charge Indicator Light: When the charger is connected, the red light
will turn on.
20. Ignition switch
21. Treble: Treble control
22. BASS: Bass control
23. IR: infrared receiver module
CAUTION:
Please be sure to charge the entire battery if the sound is distorted.

REMOTE CONTROL

1. Power Button: Short press it to enter standby mode; short press it again
to resume. If no device is connected, the system goes to "-NO-".
2. : Functions as on the master device.
3. : Functions as on the master device.
4. : Functions as on the master device.
5. Mode: Functions as "Mode" on the master device.
6. V+/V- Keys: In USB/TF/FM/AUX mode, press them to volume up/down.
7. Numeric Keys 0~9: In USB/TF card reading status, to play Track 12, just
input numbers "1" and "2", and in 2 seconds the system will go to Track