Dual surface unit (center, right front)
The dual surface unit features inner and outer elements. You can select either
element depending on the size of the cookware you are using.
NZ30K7570R_DG68-00821B-04_EN+MES+CFR.indb 19
2. To set and adjust the power level,
run your finger clockwise or
counterclockwise along the surface of
the element's control.
•
If you do not set a power level after
selecting an element, the element will
turn off automatically after 10 seconds.
•
If you have attached the magnetic knob
to the element control, grasp and turn
the magnetic knob within 10 seconds.
1. To select the cooking zone, touch the
corresponding cooking zone's selector.
•
The digital displays will show
.
2. To select the pan size, touch the Pan
Size key.
When the
indicator turns on, the unit
operates in Dual mode.
3. To set and adjust the power level,
•
•
NOTE
You can set a power level from 1 to 15 for the selected cooking zone.
NOTE
If you try to rotate the magnetic knob by grabbing its side or by pushing it, it will
not work. Grasp the knob with two fingers, and then turn it.
NOTE
If you turn the magnetic knob while wearing oven gloves, the knob will not work.
You must be bare handed.
run your finger clockwise or
counterclockwise along the surface of
the element's control.
If you do not set a power level after
selecting an element, the element will
turn off automatically after 10 seconds.
If you have attached the magnetic knob
to the element control, grasp and turn
the magnetic knob within 10 seconds.
English 19
2018-03-09
12:04:16