Panasonic DY-WL10 Instrucciones De Funcionamiento página 2

ENGLISH
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please read the instructions completely.
Please keep this manual for future reference.
This wireless LAN adaptor is intended for use with Panasonic
wireless LAN-compatible televisions, players, recorders, etc.
≥ Please refer to the appropriate instruction manual for details on how to use this wireless
LAN adaptor.
≥ Please refer to the Panasonic website for information on devices confirmed for use with
this wireless LAN adaptor.
http://www.panasonic.net/products/
(This site is in English only.)
(Product numbers correct as of November 2009. These may be subject to change.)
1 USB extension cable (K2KYYYY00064)
≥ Use according to the connection status of the device to be connected. Please refer to the
appropriate instruction manual for details on how to use.
≥ Do not use any other USB extension cables except the supplied one.
Product Identification Marking is located on the bottom of unit.
The following limits are in place regarding the usage of this device. You must be aware of these
limits before using this device.
Panasonic will in no way be responsible for any incidental damage which may arise due to a
failure to obey these limits, or to any condition of use or disuse of this device.
≥ This device is to be used as a wireless LAN device.
≥ Do not use this device to connect to any wireless network for which you do not have
usage rights.
During automatic searches in a wireless network environment, wireless networks (SSID*)
for which you do not have usage rights may be displayed; however, using these networks
may be regarded as illegal access.
≥ Data transmitted and received over radio waves may be intercepted and monitored.
≥ This wireless LAN adaptor contains delicate electronic components.
Please use this adaptor in the manner in which it was intended and follow the following
points:
j Do not expose the adaptor to high temperatures or direct sunlight.
j Do not bend, or subject the adaptor to strong impacts.
j Keep the adaptor away from moisture.
j Do not disassemble or alter the adaptor in any way.
j Do not attempt to install the adaptor in any incompatible device.
* An SSID (Service Set IDentification) is a name used by wireless LAN to identify a particular
2
network. Transmission is possible if the SSID matches for both devices.
2
Accessory
Precautions