About this Guide
The content in this document is for information purpose and is subject to
change without prior notice.
We made every effort to ensure that this User Guide is accurate and com-
plete. However, no liability is assumed for any errors and omissions that may
have occurred.
The manufacturer reserves the right to change the technical specifications
without prior notice.
Keep this user manual for further reference.
Warnings
•
Do not expose Monitor to extreme temperature. Storage temperature is
-30÷80°C, working temperature is -20÷70°C
•
Do not use the Monitor with excessive moisture, dust or smoke.
•
Do not use the Monitor with excessive vibrations, shock or falls.
•
Do not puncture, scratch or use abrasive cleaning products.
•
Install the wires in way they cannot be ripped or make you falling down
•
Leave at least 5cm space behind the Monitor
•
Monitor is not waterproof
•
The system can be powered 12 or 24 V
•
Pay attention to the right connection and polarity of the power cables.
Wrong connection can damage the device.
•
To clean the camera do not use thrill chemical substances or clean solven-
ts, but only a moist soft cloth.
•
At the end of its life, do not discard the system randomly and do not throw
it into the fire, it may explode.
•
Due to local laws and vehicles safety considerations, do not manually ope-
rate the device while driving.
This camera is intended for non-commercial use, within the limits permitted
by applicable law. The company is NOT responsible for the loss of any data/
content during operation
WARNING
Monitor works with high voltage inside. Opening and repairing has to be done
by professional and authorised technicians. Any opening or modification will
void the warranty.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
11