General Maintenance - POLTI SANI SYSTEM Business Manual De Instrucciones

Ocultar thumbs Ver también para SANI SYSTEM Business:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 47
SANI SYSTEM BUSINESS - M0S12056 - W1DS - 2U06_FEV 1000-950.qxd 10/06/2020 12:11 Pagina 28
Curved flow concentrator
WARNING: When using the concentrator
accessory it is necessary to detach the Polti
HPMed disposable bottle and connect the
empty bottle supplied.
5. OUT OF WATER
WARNING: Never fill the boiler as soon as the
safety cap is opened. The boiler is still hot,
even if the appliance is unplugged. On con-
tact with the hot, empty boiler, cold water will
evaporate producing a spray of steam which
could cause burns. Only fill the boiler when it
is cold and always keep your face away from
the boiler opening when filling.
Unplug from the mains electricity.
WARNING: If, during unscrewing, the cap
spins freely or if steam is escaping, immedia-
tely stop the operation, ensuring that the
boiler is switched off and the power cable is
unplugged from the mains. Wait for the ap-
pliance to cool (two hour) and unscrew the
cap before removal. TAKE CARE OF YOUR
FACE !!!

6. GENERAL MAINTENANCE

WARNING: Perform these operations when
the appliance is turned off, cold and discon-
nected from the mains or disconnected from
Polti Sani System Business.
7. POLTI KALSTOP
HOW TO USE POLTI KALSTOP
When the water is particularly hard, use
greater concentrations (up to one phial per
litre of water).
8. STORAGE
| 28 |

Publicidad

Tabla de contenido
loading

Tabla de contenido