Specific Safety Rules; Electric Specifications; Description Of Functions - Wagan Tech 2 Million Brite-Nite LED Lantern Manual De Usuario

Literna proyectora
Ocultar thumbs Ver también para 2 Million Brite-Nite LED Lantern:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

2 Million Brite-Nite LED Lantern by Wagan Tech

2. SPECIFIC SAFETY RULES

Be sure to charge the unit completely before its first use. This will prolong the life of
the Brite-Nite Spotlight Lantern.
Do not turn on the unit in any way while charging. Doing so may damage the
unit and is not covered under warranty. As with all lead-acid cell batteries, when
storing, be sure to recharge the battery fully every 3-6 months to prolong the life of
the battery.
Though durable and built to last, do not drop the unit excessively as this will greatly
reduce the life of the spotlight.
Do not submerge the unit under water.
Lens becomes very hot during operation. Do not touch lens while lens is still hot.
Do not cover lens during operation.
Do not shine directly into eyes.
Turn off the unit and allow it to cool before storage or maintenance.
When servicing always wear safety glasses when working with hardware.
Use only supplied chargers.

3. DESCRIPTION OF FUNCTIONS

Features
Bright 2 million power-rated beam
24 LED lantern
Built-in 6V 4AH sealed lead-acid rechargeable battery
Charge in vehicle (DC adapter) or at home (AC adapter)—both included
Great for outdoor and emergency use
Compass and carrying strap for general navigation and ease of use
3
www.wagan.com
User's Manual—Read before using this equipment

ELECTRIC SPECIFICATIONS

Operating Voltage
AC Charger
DC Charger
Rechargeable Battery
Halogen Bulb
LED
Dimensions
Net Weight
*
Direct Current symbol
4. OPERATION
Spotlight High Setting: Locate toggle switch on the handle of the Brite-Nite Spotlight
Lantern and toggle from "O" to "|" position.
Spotlight Low Setting: Locate toggle switch on the handle of the Brite-Nite Spotlight
Lantern and toggle from "O" to "II" position.
LED lantern: Locate the switch at the base of the lamp next to the charging input
jack. Slide switch to turn on.
Important
Do not turn on lamp in any way while charging. Doing so may damage the unit and is
not covered under warranty. As with all lead-acid cell batteries, when storing, be sure to
recharge the battery fully every 3-6 months to prolong the life of the battery.
© 2009 Wagan Corporation
Wagan and wagan.com are trademarks used by Wagan Corporation
6V
*
INPUT: 120V ~ 60Hz 6W
OUTPUT: 9V
300mA
MODEL: WJ-Y350900300D
INPUT: 120V ~ 60Hz 6W
OUTPUT: 9V
300mA
12V
Sealed lead acid battery 6V DC, 4 AH
BRAND: XINSHUN
MODEL: LT640
6V
4Ah
Battery included
Quartz Halogen Bulb 6 Volt 8W/20W H3
24 units of white 15,000 MCD
11" x 7.3" x 7"
3 lbs
All Rights Reserved
4

Publicidad

Tabla de contenido
loading

Tabla de contenido