9. ERROR DISPLAYS
If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.
Error Display
ERROR 2
A CD is caught inside the CD deck and is
not ejected.
ERROR 3
A CD cannot be played due to scratches,
etc.
ERROR 6
A CD is loaded upside-down inside the CD
deck and does not play.
ERROR 2
A CD inside the CD changer is not loaded.
ERROR 3
A CD inside the CD changer cannot be
played due to scratches, etc.
ERROR 6
A CD inside the CD changer cannot be
played because it is loaded upside-down.
If an error display other than the ones described above appears, press the reset button. If the problem
persists, turn off the power and consult your store of purchase.
22
CMD4
Cause
Measure
This is a failure of CD deck's mechanism.
Consult your store of purchase.
Replace with a non-scratched,
non-warped-disc.
Eject the disc, then reload it properly.
This is a failure of CD changer's mechanism.
Consult your store of purchase.
Replace with a non-scratched, non-warped
disc.
Eject the disc, then reload it properly.