Publicidad
Idiomas disponibles
Idiomas disponibles
130 ft CAT 6 HDMI and
remote control extender
Receiver
Sender
Instruction manual
V1.1
INSTRUCTIONS
1. Connect a Cat5e or Cat6 cable from transmit-
ter to receiver cable.
2. Use an HDMI cable to connect the video
source (Blu-Ray, console, DVD, etc.) to the
transmitter and another to connect the screen to
the receiver.
3. At the transmitter connect the IR extender
(TX), it must aim to the video source.
4. In the receiver connect the IR extender (RX), it
must be in a visible place and aim forward.
5. Insert the power adaptoers in both modules
and plug into an electrical outlet.
NOTES:
If is necessary place in the extensor adhesives to secure them to a surface.
If you experience problems connecting both modules press the RESET button.
Use the brackets and screws to attach the modules to a solid surface.
Before using your product, please read
208-187
the following instructions
CAUTION
• This device cannot be used by people
with different habilities, at less they have
preparation and supervision.
• This product is NOT a toy; keep it
away from children.
0617A
Video source
IR
extender
(TX)
HDMI IN
IR OUT
3
1
CONNECTION
Blu-Ray
Cat 6: 40 m
DC 5V
Reset
CAT6
LINK
Cat 5: 20 m
SENDER
5
CONTENT
Receiver
Receiver
Sender
Sender
Remote control
extenders IR
Power converter
Adhesives
extenders
IR
extender
(RX)
HDMI OUT
Reset
CAT6
LINK
IR IN
RECEIVER
SPECIFICATIONS
Input: 5 V - - - 1 A
Resolutions: 480i, 576i, 1080i, 480p, 576p,
720p, 1080p
Operational temperature: 0 to 70°
RH: 10% to 85% non condensed
Power converter
Input: 100 - 240 V 50 - 60 Hz 200 mA
~
Output: 5 V - - - 1 A
Product design and specifications are subject to
change without notice.
Screws
(x8)
Supports
(x4)
2
Screen
DC 5V
4
6
Publicidad
