Tabla de contenido
Publicidad
Solución de Problemas
Problem
The photo has streaks
The paper jammed before printing
(nothing has been ejected)
The paper jammed while printing (part
of the image has already ejected)
If all else fails...
Para obtener más información para solucionar problemas y preguntas frecuentes, visite
www.polaroid.com.
Polaroid, Polaroid & Pixel, Polaroid Classic Border Logo y Polaroid Grey Label son marcas comerciales de PLR IP Holdings, LLC,
usadas bajo licencia. Todas las demás marcas comerciales son propiedad del propietario respectivo, que no ha patrocinado,
aprobado ni sancionado este producto. PLR IP Holdings, LLC no fabrican este producto ni proporcionan ninguna garantía y
servicio del fabricante.
Distribuido por: C&A Licensing, LLC, 2 Bergen Turnpike, Ridgefield Park, NJ 07660, USA
©2013 Reservados todos los derechos
Las marcas ZINK® Technology y ZINK® son propiedad de ZINK Imaging, Inc. usadas bajo licencia.
Solution
DO NOT:
Send another image
to be printed.
DO:
Turn o
the printer. Open the
ZINK Paper® tray door and remove
the ZINK Paper®. Place one blue ZINK
SmartSheet® (with the barcode facing
down) in the paper tray. Close the
ZINK Paper® tray door and turn the
printer on. The ZINK SmartSheet® will
automatically eject. Open the ZINK
Paper® tray door and reload the ZINK
Paper®.
DO NOT:
Send another image
to be printed.
DO:
Open the ZINK Paper® tray door.
Check to see if there is ZINK Paper® in
the tray. If so, ensure the ZINK Paper®
is loaded correctly. Press the "Reprint"
button to resume printing.
DO NOT:
Pull out paper.
DO:
Turn o
the printer. Wait 5
seconds, turn the printer back on.
Printer will eject current photo. To
reprint, resend your photo to the
printer.
DO:
Turn o
the printer. If the printer
will not power o , disconnect the AC
adapter. Remove the battery cover
and the battery. Replace the battery
and battery cover. Turn on the printer.
9
Publicidad
Tabla de contenido
