Video Features; Multi Gpu Configuration; Display Devices - bto X.Book 17CL50 Manual Del Usuario

Video Features

This computer features two different (either NVIDIA or
AMD) video options. You can switch display devices,
and configure display options, from the Display control
panel in Windows as long as the video driver is installed.
To access Display control panel in Windows:
1. Click Start, and click Control Panel (or point to Settings and
click Control Panel).
2. Click Display (icon) - in the Appearances and
Personalization category.
3. Click Adjust Screen Resolution/Adjust resolution.
OR
4. Alternatively you can right-click the desktop and select Screen
resolution.
5. Use the dropbox to select the screen Resolution.
6. Click Advanced settings.
To access the NVIDIA Control Panel:
1. Click Start, and click Control Panel (or point to Settings and
click Control Panel).
2. Click NVIDIA Control Panel (icon) - in the Appearances and
Personalization category.
OR
3. Right-click the desktop and select NVIDIA Control Panel from
the menu.
To access the Catalyst™ Control Center:
1. Right-click the desktop and select Graphics Properties.
OR
16
2. Double-click the icon
Configure Graphics) in the notification area of the taskbar
(make sure "Enable System Tray Menu" is clicked in
Preferences).

Multi GPU Configuration

This computer features NVIDIA Scalable Link Inter-
face (SLI)/ AMD CrossFireX that improves graphic
quality and performance by combining dual GPUs (two
video cards are required) in a single system.
To enable/disable SLI Configuration:
1. Go to the NVIDIA Control Panel.
2. Click "+" next to 3D Settings if its sub-items are not shown and
then click Set SLI Configuration.
3. Click "Enable SLI technology (recommended)".
4. Click to "Select the display to view the SLI rendered content
on." (only a single display may be used).
5. Click Apply and Yes to restart the computer.
To enable/disable CrossFireX Configuration:
1. Go to the Catalyst™ Control Center.
2. Click ">" next to Gaming if its sub-items are not shown and then
click AMD CrossFireX.
3. Make sure the option "Enable AMD CrossFireX™" is selected.

Display Devices

Besides the built-in LCD, you can also use an external
VGA monitor (CRT)/external Flat Panel Display or TV
(connected to the HDMI-Out port/DisplayPort) as your
display device.
(or right-click the icon and select