Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTION MANUAL
SPECIFICATIONS
Model
Loudspeaker
Rated Power (RMS)
Power Taps 100 V
Power Taps 70 V
Impedance
Sensitivity SPL (1 W / 1 m)
Sound Pressure SPL (30 W / 1 m)
Freq. Range
Cutout Size
Dispersion 1 kHz / 4 kHz
Dimension (mm)
Weight
Finish
Colour
Mounting
Power selection
INSTALLATION GUIDE
Step 1 – Cutout the hole size, either by tracing the cardboard cutout template or with a circular cutter set to the cutout sizes listed
above. Pull the wiring through the cutout hole. (Figure 1)
Step 2 – Connect the wiring to the removable locking connector INCLUDED with the speaker. (Figure 2)
Step 3 – Plug connector into connector socket in the speaker's terminal cup. (Figure 3)
Step 4 – Tighten the Strain Relief Fitting & Close the Terminal Cover. (Figure 4)
First, remove the horizontal screw. Next, loosen the screws holding the fitting's sliding pieces onto the input-terminal cover by about
a half turn. Run the wires through the opening in the fitting. (Figure 5)
The strain relief can be tightened in two ways, choose whichever is best for your application.
Figure 1
A-266MAC Version 1.0
Figure 2
WARNING:
⋅ Installation by qualified personnel only.
⋅ Speakers must be wired in parallel and connected to
the correct line terminals of amplifier.
⋅ Ensure that all speakers have the same polarity with
respect to each other.
⋅ Do not select another tapings if the speaker is in use.
⋅
No naked flame sources, such as lighted candles,
should be placed on the apparatus
1 x 6,5" and 1 x 0,75" tweeter
30 W, 15 W, 7'5 W, 3'75 W & 8 Ω
30 W, 15 W, 7'5 W, 3'75 W, 1'9 W & 8 Ω
167 Ω, 333 Ω, 667 Ω, 1k3 Ω, 2k6 Ω & 8 Ω
Ø 250 x 205 (depth)
Baffle: ABS (UL94V0). Backcan: Steel
Rotating Mounting Tabs
Figure 3
CEILING SPEAKER
A-266MAC
30 W
89 dB
104 dB
75 ~ 25.000 Hz
Ø 220 mm
140º / 75º
3,58 kg
White (RAL 9016)
Rotary switch
Figure 4
A-266MAC
.
Figure 5
Publicidad
