Publicidad
Idiomas disponibles
Idiomas disponibles
OUTDOOR BULLET TYPE
WI-FI CAMERA
Quick Guide
IMPORTANT
Before using the product, carefully read this quick guide to avoid any malfunction.
The information presented serves only as a reference on the product; due to updates
there may be differences.
Check our website www.steren.com for the latest version of manual.
CAUTIONS
This device is not intended for use by persons (including children) whose
physical, sensory or mental abilities are different or reduced, or lack experience or
knowledge.
Children should be supervised to ensure that they do not use the device as a toy.
Do not try to open the equipment; may cause a malfunction and the warranty will
be voided.
Do not expose the equipment to extreme temperatures.
Do not submerge or expose this equipment to direct jets of water or any other
liquid.
Do not place the equipment on unstable or vibrating surfaces.
Do not place heavy objects on the equipment.
Wipe it with a soft cloth.
The operation of this device is subject to the following two conditions: (1) it is possible that this device may not cause
harmful interference and (2) this device must accept any interference, including interference that may cause undesired
operation.
CONFIGURATION
In order to add a camera to the application, it must not have been previously added to another account.
Select the + icon (on the upper right) to add a team.
1
After creating your account, you must "crear tu hogar" by
2
Next, choose Sensor de protección classification
establishing the areas where Smart Home equipment is
located.
and, finally, Cámara de seguridad.
Press Siguiente paso and enter the password for the
A QR code will be generated with the network data. Press
3
4
Wi-Fi network to which you will add the camera. When
Continuar and place the smartphone in front of the
finished, press Confirmar.
camera.
When the camera reads the code, it will emit a sound
(confirmation) and the indicator LED will flash rapidly.
Once connected to the network, the LED will remain fixed.
RESET
Remove the screws from the compartment under the camera. Make sure to carefully lift the lid, since the horn is
1
attached to this piece.
Press and hold the reset button until the camera beeps; stop pressing and wait until the camera emits another sound and
2
the LED turns on and off constantly. This indicates that it has been successfully rebooted.
The camera must be connected to
eliminator to be able to perform this process
SPECIFICATIONS
Input: 12 V - - - 1 A
Power converter:
Minimum light: 0.1 lux
Input: 100 - 240 V 50 - 60 Hz 0,35 A
Video compression: H.264 AVC
Output: 12 V - - - 1 A
Video: 5 - 30fps
Audio format: AAC
Protocol: TCP/IP, HTTP, DHCP, DNS
Wireless network: 802.11b/g/n
Micro SD card maximum capacity: 128 GB
Video resolution: 1 920 x 1 080
Angle of view: 63 degrees
Lens: f= 3.6mm to F1.2
The specifications may vary without prior notice
INSTALLATION OF MICROSD CARD
CCTV-226
0619G
V0.2
a
Remove the screws from the compartment below
of the camera.
c
Insert a microSD memory (up to 128 GB).
5
When you have heard the confirmation of the camera,
press Oir el tono de aviso, and wait until the application
adds the camera to your "home" devices.
WARRANTY POLICY
Product: Outdoor bullet type Wi-Fi camera
Model: CCTV-226
Brand: Steren
WARRANTY
This Steren product is warranted under normal usage against defects in workmanship and materials to the original purchaser
for one year on the other parts from the date of purchase.
CONDITIONS
1. This warranty card with all the required information, invoice or purchase ticket, product box or package, and product, must
be presented when warranty service is required.
2. If the product is in the warranty time, the company will repair it free of charge. The supplier will pay for transportation
charges.
3. The repairing time will not exceed 30 natural days, from the day the claim was received.
4. Steren sell parts, components, consumables and accessories to customer, as well as warranty service, at any of the
addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow enclosed
instructions, improper repair by unauthorized personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
RETAILER INFORMATION
Name of the retailer ____________________________________
Address _____________________________________________
Serial number ________________________________________
Product ______________________________________________
ELECTRÓNICA STEREN S.A. DE C.V.
Biólogo Maximino Martínez No. 3408, San Salvador Xochimanca, Del. Azcapotzalco Ciudad de México 02870, RFC:
EST850628-K51
STEREN PRODUCTO EMPACADO S.A. DE C.V.
Autopista México-Querétaro. Km 26.5 Sin número, Nave Industrial 3-A, Col. Lomas de Boulevares, Tlalnepantla de Baz,
Estado de México, C.P. 54020, RFC: SPE-941215-H43
In case your product fails or have questions, please contact your nearest dealer.
If you are in Mexico, please call to our Call Center.
01 800 500 9000
INSTALLATION AND REGISTRATION OF THE APP
Go to the app store of your smartphone to download and install the app:
Separate the compartment lid.
b
Make sure you do it carefully,
since the horn is attached to this piece.
d
Replace the cap and screws.
Assign a zone to the camera and, if required, edit the
6
name. Press Finalizado to start the visualization.
This application is not owned by Steren; The
company is not responsible for its operation or
updates.
To carry out this instruction, a device with an
Android 8.0.0 operating system and the
Steren Home 1.0.1 application was used. The
Download on the
App Store
presentation of the application and the
procedure may vary depending on the version
of the application and the operating system
used.
Select the country and enter your email.
1
Open the application and select
2
When finished, choose the option
Crear cuenta nueva.
Obtener el código de verificación.
Check your email to find out what the
verification code is.
DESCRIPTION OF THE INTERFACE
1. Return
1
2
2. Name of the camera
3. Camera settings
4. Percentage of the modem signal to the camera
5. Change image quality (SD = standard / HD =
maximum definition)
6. Enable / disable audio transmission from the
camera to the smartphone
5
7. Change the display to full screen
8. Play microSD memory content (if inserted)
6
9. Activate alarm
10. Enable / disable audio streaming from the
smartphone to the camera
11. Record in the memory of the smartphone
12. Capture photo in the smartphone memory
9
12
10
Enter the code and create a
3
password. Tap Finalizado to
finish the process.
3
4
7
8
11
Publicidad
