Brigmton BPM-1300 Manual De Instrucciones página 28

8.Firmware upgrade
Click this menu, it will automatically scan firmware, the player will remind whether
upgrade firmware, without the firmware, pls exit
9.Restorable
Click the System Restore option, there will be a dialogue "whether restore system to
default status " Click YES, the player will restore the default settings.
10.Calibration
Click central of three "十" for twice, the calibration will be completed and it will exit
automatically(Remark: After calibrating the screen, you should turn off normally, the
action will be saved)
11.Vibration
In this menu there are: on and off(After the closure of this vibration, there will be no
shock when touching the touch)
12.Transfer screen
In this menu there are: On, Off (after the closure of the transfer screen, rotating
machinery will not significantly synchronized rotate)
13.Clock setting
In this menu there are two item: time setting, date setting
c. click time setting to enter into clock setting interface, then click
/
d. Click date
click /
14.Language
In this menu there are：Simple Chinese, English, Traditional Chinese
15.System information
In this menu there are the local capacity status, manufacture name and TF card
capacity, which is read-only information
16. Auto Shut time
In this menu there are:3 minutes,5 minutes,10 minutes,15 minutes, 20 minutes and no
automatic shut
TF card operate steps
1.Insert TF card
Insert TF card to the player, when popping, then push TF card to exit.
2.TF card connect with computer
Under inserting TF card, when the player connects the computer, there will be two
mobile disk, now you can operate these two disk as the other mobile disk.
3.Disconnect the player with computer
Enter into "Explorer" interface, there will be two option, "Inside Memory" and "TF card",
left/right icon to set hour/minute, click YES after setting
setting to enter
left/right icon to set Year/month/date, click YES after setting
into clock setting interface, then