Usb Audio - Brigmton BAMP-604-N Manual De Instrucciones

time played before power off. When inserting the earphone or
3.5mm audio cable into the speaker, which can act as the external
antenna to enhance the FM signal.
(4) Recorder
Please put the Micro SD Card/ USB disk into the speaker. Short
press the /
M button to confirm. Short press the
and continue the record". Long press the
recorded files. Long press the M button to exit this mode.
(5) Aux In
Enter the Aux In mode. Use the 3.5mm audio cable included to
connect the speaker to an audio source (PC, MP3/MP4, mobile
phone). The speaker will play the music from the audio source.

(6) USB AUDIO

Please use the USB cable to connect the speaker to the computer,
short press the Mode button to enter the USB Audio Mode, which
will work as a computer speaker. The first time to use this
function, computer will automatically identify the speaker and
install the driver for it.
(7) Browse Picture and Video playing
Please put the Micro SD Card/ USB disk into the speaker (Saved
with the picture/ video). Press the
Picture/video mode, then press the M button to confirm. Press the
button to browse the picture/play video. Long press the M
button to exit this mode.
(8) Card Reader Function
Put Micro SD card into the powered off speaker and use the USB
cable to connect it to the computer. The speaker will automatically
power on and switch to card reader mode, and display
the LED. The computer will then automatically recognize the
device and the Micro SD card will be able to be read /written on
the computer directly. Please note the card reader function is for
Micro SD Card Only.
(9)Charging Function
Please connect the speaker to the computer by the included USB
cable for charging. It also can use the branded 5V/1000mA
adaptor for charging.
Please Note: Not charging the speaker more than 4 hours
buttons to select the Record mode, then press the
button to "begin, pause
button to save the
/ buttons to select
on
12