Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
The operationof any tiller can result in foreignobjects throwninto the eyes,
which can result in severeeye damage.Alwayswear safetyglasses or eye
shields beforestartingyour tiller and while tilling.We recommenda wide vi-
sion safety maskover spectaclesor standardsafetyglasses.
HOW TO USE
YOUR
TILLER
Know how to operate
all controls
before
adding
fuel and oil or attempting
to start
engine.
STOPPING
TINES
AND DRIVE
1.
Release
drive control
bar to stop move-
ment.
2.
Move shift lever to "N" (neutral)
po-
sition.
ENGINE
• Move throttle
control
to "STOP"
position.
If equipped
with stop switch,
move
switch to "STOP"
position.
NOTE:
Never use choke to stop engine.
Drive Control Bar
"ENGAGED"
Position
Shift Lever
Drive Control Bar
"DISENGAGED"
Position
Throttle Control
TINE
OPERATION
- WITH
WHEEL
DRIVE
• Always
release
drive control
bar before
moving
shift
lever into another
position.
• Tine movement
is achieved
by mov-
ing shift lever to (_,) till position
and
engaging
drive control
bar.
FORWARD
- WHEELS
ONLY/TINES
STOPPED
• Release
drive control
bar and move shift
lever indicator
to "F" (forward)
position.
Engage
drive control
bar and tiller will
move forward.
REVERSE
- WHEELS
ONLY/TINES
STOPPED
1.
DO NOT STAND
DIRECTLY
BEHIND
TILLER.
2.
Release
the drive control
bar.
3.
Move throttle
control
to "SLOW"
po-
sition.
4.
Move shift lever indicator
to "R" (re-
verse)
position.
5.
Hold drive control
bar against
the
handle
to start tiller movement.
HARD
TO SHIFT
GEARS
• Briefly engage
drive control
bar and re-
lease or rock tiller forward
and backward
until are able to shift gears.
DEPTH
STAKE
The depth stake
can be raised or lowered
to allow you more versatile
tilling
and cul-
tivating,
or to more easily
transport
your
tiller.
Shallowest Tilling --._...
(Cultivating)
Deeptest Tilling_
Depth Stake -------
"" Transport Position
TILLING
1.
Release
depth
stake pin.
Pull the
depth
stake up for increased
tilling
depth.
Place depth
stake
pin in hole of
depth
stake to lock in position.
2.
Place shift lever indicator
in till position.
3.
Hold the drive control
bar against
the
handle to start tilling movement.
Tines
and wheels
will both turn.
4.
Move throttle
control
to "FAST" position
for deep tilling.
To cultivate,
throttle
control
can be set at any desired
speed,
depending
on how fast or slow
you wish to cultivate.
IMPORTANT:
Always
release
drive control
bar before
moving
shift lever into another
position.
Depth Stake Pin
"RELEASED" Position
Nut
"B"
Side Shield
"Locked"
Position
9
Publicidad
Tabla de contenido
