Connect Headphones; Switch On; Select Language; Autotune - PURE Move 2500 Manual De Instrucciones

Connect headphones

Attach the size of earbuds
that best fi ts your ears for the
optimum sound quality and
noise isolation.
Unravel the earphone cable and
connect the headphones to the
socket on the bottom of Move.
Damage to hearing can occur with consistent exposure to high
volume when using headphones. Always check the volume level
before using Move.
Note: Because the headphone cable doubles as an aerial, using
headphones with shorter or asymmetrical cables may affect
reception. Move is designed for headphones with a standard
3.5mm connector with two rings, headphones with three ring
connectors may not work as expected.

Switch on

Press Source to switch
Move on.

Select language

Turn the navigation dial and press
select to choose from English,
French, German or Italian.

Autotune

Move will perform an autotune
for digital stations and tune to
a station when complete. The
number of stations found is
displayed during an autotune.
Note: An autotune can take up to two minutes.
Move 2500
Language
English
Scanning...
BBC Radio 2
Now playing: Pur
*
DR
32
EN
ST
DR
7