Features; Assembly - Ryobi RY40806 Manual Del Operador

PRODUCT SPECIFICATIONS
Motor .................................................................. 40 Volt DC
Clearing Width ............................................................ 21 in.
Clearing Depth ........................................................... 13 in.
KNOW YOUR SNOW BLOWER
See Figure 1.
The safe use of this product requires an understanding of
the information on the product and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all op-
erating features and safety rules.
ADJUSTABLE IMPELLER SPEED
Decreasing the impeller speed for a smaller snow accumula-
tion allows for a longer running time.
BATTERY COVER
The battery cover protects the battery ports from moisture
and debris.
UNPACKING
This product requires assembly.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the Packing
List are included.
WARNING:
Do not use this product if any parts on the Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-860-4050 for assistance.
PACKING LIST
Snow Blower
Chute Deflector
Phillips Screw
Operator's Manual

FEATURES

Wheel Size .................................................................... 8 in.
Throwing Distance ............................................. Up to 35 ft.
CHUTE DEFLECTOR HANDLE
The chute deflector handle allows you to change the distance
that snow will discharge from the chute.
CHUTE ROTATION LEVER
The chute rotation lever allows you to choose the direction
that snow will discharge from the snow blower. The lever
allows the chute to rotate up to 180º.
LED HEADLIGHT BAR
The LED headlight bar is located on the front of the unit to
illuminate your path in low light conditions. The lights will
operate whenever the motor is running.

ASSEMBLY

WARNING:
To avoid the risk of injury, do not operate without dis-
charge chute in place.
WARNING:
If any parts are damaged or missing, do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
WARNING:
Do not insert battery pack until assembly is complete
and you are ready to use snow blower. Failure to comply
could result in accidental starting and possible serious
personal injury.
7 — English