Audio Controls; Power Supply; Bluetooth Operation - Muse M-22 US Manual De Instrucciones

GB PORTABLE BLUETOOTH RADIO CD PLAYER
LOCATION AND DESCRIPTION OF CONTROLS
1. HANDLE
2. FM TELESCOPIC ANTENNA
3. CD COMPARTMENT
4. AUX.IN: AUXILIARY INPUT
5. POWER ON-OFF/SOURCE: FM, AM (MW), CD,
BLUETOOTH ( ), AUX IN
6. PROGRAM / RADIO PRESET STATIONS
REPEAT
7. / PAIR: PLAY / PAUSE / PAIR
8. MEMORY / STOP

POWER SUPPLY

This unit operates on AC (230 V 50 Hz) or DC (9V
AC OPERATION
Connect the AC power cord from the unit to the mains. Make sure that the voltage is compatible with your device before
turning it on.
Disconnect the AC power cord from the mains when not in use.
NOTE: In a concern of saving energy, when playback has reached to the end or listening volume is set at a very low level
and no control is operated on the device for a period of 2 hours, the unit will automatically switch to Standby mode.
BATTERY OPERATION
Open the battery compartment at the rear of the unit and insert 6 pieces of batteries, observing the polarity diagram
indicated inside the compartment and close the compartment. To switch from AC power to battery power, disconnect the
AC power cord.
BATTERY REPLACEMENT
Batteries should be replaced when the volume decreases or the sound distorts.
Notes on batteries
• Do not mix batteries of different types or new batteries with used batteries.
• Do not recharge, heat it and never remove the batteries.
• The batteries can not be exposed to excessive heat such as sunshine, fire or the like.
• Please respect the environment when disposing of used batteries.
NOTE
To prevent leakage, always remove the batteries from the device when it is not used for an extended period.
RD-3353T IB MUSE 002 REV2-US.indd 4
9. SKIP/SEARCH /TUNING BACKWARD
10. SKIP/SEARCH /TUNING FORWARD
11. VOLUME DOWN
12. VOLUME UP
13. SPEAKER
14. LCD DISPLAY
15. AC IN POWER INPUT
/
16. BATTERY AND AC POWER CORD
COMPARTMENT
) 6 x 1.5V Type UM-2 /R 14 / '' C'' ( Batteries not included ).
EN - 1

AUDIO CONTROLS

Press to turn the unit on. When the unit is on, press
BLUETOOTH, AUX IN.
LISTENING TO THE RADIO
MANUAL SEARCH
1. Press to select FM or AM (MW).
2. Press repeatedly or to find your station.
3. Adjust the sound level with or .
FOR OPTIMAL RADIO RECEPTION:
FM: Extend and position the telescopic antenna.
AM (MW): Rotate the unit horizontally.
AUTOMATIC SEARCH
Press to select FM or AM (MW).
Press and Hold on or for about 2 seconds to start the search. The automatic search function locates stations whose
signal is strong. Press again or to continue the search.
Note:
Stations with weak signals can be searched manually.
The sound is automatically muted during search.
RADIO PRESET STATIONS
1. Select a station manually or automatically with or
2. Press once , "P01" blinks on the display for a few seconds.
3. Press or to select a preset number.
4. Press again to store the radio station on the selected memory number.
5. Repeat steps 1-4 to store other stations.
Note:
When you store a station in a memory number already occupied, the existing station is automatically erased.
LISTENING TO PRESET STATIONS
Press button to select a preset station.

BLUETOOTH OPERATION

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks
®
by New One S.A.S is under license. Other trademarks and trade names are those of their respective owners.
• Before operate the Bluetooth function, make sure your mobile phone supports Bluetooth function.
• For different model of mobile phone, Bluetooth emissive power has some difference. It is recommended that the distance
between the mobile phone and the unit is within 10 meters.
• Don't put any metal object or any obstacle between the path of the mobile phone and the unit.
MANUAL PAIRING
1. Press to select (Bluetooth) mode.
2. Turn on the Bluetooth function of your mobile phone. (Please refer to the instruction manual of your mobile phone on
how to operate Bluetooth.)
3. Select the item of searching the Bluetooth device and enter it. Your mobile phone starts to search for Bluetooth devices
within range (10 meters). Select this radio "M-22 BT" and confirm it.
Note:
- Enter 0000 for the password if necessary and confirm it.
- If you have made Bluetooth connectivity before, a list of the previous search results is displayed. Select "M-22 BT" and
confirm.
4. When pairing is successful, you can hear "beep" sound and "
5. During playback, press / PAIR button to pause playback, press again to resume.
6 During playback, press or to skip tracks.
7. Press and hold the / PAIR button until " " flashes on display to disconnect the Bluetooth connection.
Hereby, NEW ONE S.A.S, declares that this MUSE M-22 US/M-22 LD/M-22 BT is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC. The declaration of conformity may be consulted at
http://www.muse-europe.com/conformity/M-22US.pdf
again to select your listening source: FM, AM (MW), CD,
.
" will appear on display.
EN - 2
2016/9/21 16:46:41