Before Use - Intenso Video Rider Instrucciones De Uso

5.

Before use

Please assure that the Micro SD card supplied is inserted.
Connect with the PC
Please go ahead as follows:
(1) Connect the player with the USB connection of the PC.
(2) The window "Intenso" will open. Now you can save the data from your hard disk on
the removable medium.
Safe removal from the PC
For Windows XP/Vista/Windows 7:
Click with the right mouse button down right in the task bar on the symbol "Remove
hardware securely". In the displayed context menu please select the point "Remove USB
mass storage device driver" with the left mouse button. Please make sure that the data
transmission has been completed.
Now you can remove the device.
Battery charge:
The device is equipped with an integrated li-polymer battery. The battery is charged by the
USB connection with your PC.
At the first use of the device please pay attention that the battery is completely charged, in
general this process takes 4 hours.
To charge the battery please connect the device with the PC by the USB cable. The
charging process starts automatically.
If you would like to know the actual status of the charging process, please disconnect the
device from the PC. On the display top right you can see a battery symbol. If the symbol
flashes green, the battery is completely charged.
Instruction: To achieve an optimal performance the li-polymer battery must be regularly
used. If this is not the case, charge the battery completely at least once per month.
Page 3 of 12 GB