Troubleshooting - Triton TRTA 001 Instrucciones De Uso

4. Align the mounting studs with the Router Securing Holes on the Router Base Plate (1), and
slide into the keyhole slots (Image B)
5. Tighten the baseplate mounting knobs on the plunge router firmly to secure the plunge
router to the Router Track Adaptor
Track rail attachment
• Loosen the Adjustment Locking Knob (5) By turning it anticlockwise, before making
adjustments
• Fit the Adaptor Body (4) to the extruded guide rail on the track. Adjust the Track Width
Adjustment Screws (6) on the Adaptor Body using a hex key, to give a snug fit
• Adjust the Track Rail Adaptor's position using the Macro Adjustment Knobs (3), to ensure
the Router Base Plate (1) does NOT contact the track rail
• Turn the Micro Adjustment Screw (7) to position the plunge router accurately for cutting
• After adjustments have been made, lock the settings into place, by turning the Adjustment
Locking Knob clockwise
Note: The adjustment range is made using the extension from the Micro adjustment (see
'Specification') and does not include the extension from the Macro Adjustment Knobs.
Operation
WARNING: ALWAYS read the manual supplied with your router before operation, and follow the
router manufacturers usage instructions and recommendations.
WARNING: ALWAYS use adequate protective equipment, including eye protection, respiratory
and hearing protection, when working with this tool.
Note: ALWAYS use clamps to secure your workpiece to the workbench wherever possible.
Note: For correct positioning of the Router track adaptor, (Image C).
Note: This router track adaptor should NOT be used close to the edge, or on the edge, of a
workpiece, as the router may become unstable and tip off the track.

Troubleshooting

Problem
Uneven cut
Guide rail movement when in operation
Resistant or sticking sliding motion
Guarantee
To register your guarantee visit our web site at
www.tritontools.com* and enter your details.
Your details will be included on our mailing list (unless indicated otherwise) for
information on future releases. Details provided will not be made available to any third
party.
Purchase Record
Date of Purchase: ___ / ___ / ____
Model: TRTA001 Retain your receipt as proof of purchase
• Confirm that the tool and the workpiece are correctly supported, and guide the router and
the tool using both hands (Image D)
• For instructions about how to use the plunge router correctly, refer to the Triton plunge
router manual
WARNING: ALWAYS maintain a secure hold on the router whilst the machine is powered on
and fitted to the track.
Accessories
• A range of accessories, including Tracks (TTST1500), Work Clamps (TTSWC) and Track
Connectors (TTSTC) are available from your Triton dealer. Spare parts can be purchased
from your Triton dealer or online at www.toolsparesonline.com
Maintenance
WARNING: ALWAYS disconnect from the power supply before carrying out any inspection,
maintenance or cleaning.
• This tool is manufactured using class-leading components and makes use of the latest in
intelligent engineering that protects the tool and its components. In normal use it should
provide a long working life
Cleaning
• Keep your tool clean at all times. Dirt and dust will cause internal parts to wear quickly,
and shorten the tool's service life. Clean the body of your tool with a soft brush or dry
cloth. If available, use clean, dry, compressed air to blow through the ventilation holes
Storage
• Store this tool after use in a dry, secure place out of the reach of children
Possible cause
Loose fastener allowing movement between components
Adjustment Locking Knob (5) not tightened securely
Track Width Adjustment Screws (6) are too tight
The track is insufficiently lubricated, or dust and other debris
has built-up on the track
Triton Precision Power Tools guarantees to the purchaser of this product that if any
part proves to be defective due to faulty materials or workmanship within 3 YEARS
from the date of original purchase,
Triton will repair, or at its discretion replace, the faulty part free of charge.
This guarantee does not apply to commercial use nor does it extend to normal wear
and tear or damage as a result of accident, abuse or misuse.
* Register online within 30 days.
Terms & conditions apply.
art pr This does not affect your statutory rights
Solution
Ensure all fasteners are adequately tightened on Adaptor,
Track and Router
Tighten Adjustment Locking Knob to lock guide rails into
place after adjustment
Loosen Track Width Adjustment Screws until there is little
or no resistance
Clean the track and apply PTFE spray or other forms of dry
lubricant to eliminate resistance
oves to be defecti
GB
5