INVENTOR FN40-INV Manual Del Propietário página 9

MAINTENANCE INSTRUCTION
This fan requires limited maintenance. Do not attempt to fix on your own. Always refer to
qualified personnel if any service is required.
1. Prior to cleaning and assembling, the fan must be unplugged.
2. To ensure adequate air circulation, vents should be free of dust at all times. Do not disassemble
the fan in order to remove the dust.
3. The exterior parts of the device may be wiped with a soft and damp, with a mild detergent,
cloth.
4. The use of any abrasive detergents or solvents should be avoided as this may result in
scratching the surface. The use of gasoline or paint thinner, for cleaning purposes, should be
avoided.
5. Water or any other liquids in the motor housing or interior parts of the device, must be avoided
at all times.
CLEANING
1. Prior to performing any cleaning the device must be unplugged.
2. All plastic parts of the device should be cleaned with a soft moist cloth and with mild soap.
Thoroughly clean any soap excess with a dry cloth.
All the pictures in the manual are for explanatory purposes only. The actual shape of the unit you
purchased may be slightly different, but the operations and functions are the same.
The company may not be held responsible for any misprinted information. The design and the
specifications of the product for reasons, such as product improvement, are subject to change
without any prior notice.
Please consult with the manufacturer at +30 211 300 3300 or with the Sales agency for further
details. Any future updates to the manual will be uploaded to the service website, and it is advised
to always check for the latest version.
Scan here to download the latest version of this manual.
www.inventorappliances.com/manuals
9
ΕΝ