All operating elements and connections can be
found on the fold-out page 3.
Contents
1
2
Safety Notes . . . . . . . . . . . . . . . . . . . . . . . 12
3
4
5
Operation . . . . . . . . . . . . . . . . . . . . . . . . . 14
6
1 Operating Elements
and Connections
1.1 Control panel LED-32C
1 Buttons COLOUR PRESETS 1 to 8 to memo-
rize and call illumination scenes
(8 scenes each in 4 memory banks)
2 Button PROGRAM REC to switch the program-
ming mode on and off
3 Display
4 Buttons
and
- to select one of the 4 memory banks
- to advance and reverse scenes when a
sequence of scenes is running manually
- to adjust the sensitivity of the music control
when a sequence of scenes is running
- to adjust the number of cycles when several
sequences of scenes are running
5 Button DEL / CLEAR to delete a memorized
scene or sequence of scenes and to turn off the
spotlights after a scene has been adjusted and
memorized
6 Buttons CHASES 1 to 8 to call memorized
sequences of scenes
7 Buttons FIXTURE SELECTOR 1 - 8 to select
and cancel eight spotlights or eight groups of
spotlights
8 Control for the 1
st
DMX channel of the selected
spotlight: For most spotlights, this is the channel
for the red LEDs.
9 Control for the 2
nd
spotlight: For most spotlights, this is the channel
for the green LEDs.
10 Control for the 3
rd
DMX channel of the selected
spotlight: For most spotlights, this is the channel
for the blue LEDs.
11 Control for the 4
th
DMX channel of the selected
spotlight: For most spotlights, this is the channel
for the total brightness of the LEDs.
12 Button INSERT / TAP to insert an additional
scene into a programmed sequence of scenes
and to adjust the time of scene when a
sequence of scenes is running automatically
13 Button to select the mode when a sequence of
scenes is running
MANUAL = the sequence of scenes can manu-
ally be advanced and reversed with
the buttons
MUSIC =
the sequence of scenes is running
to the rhythm of the music picked up
via the internal microphone (20).
DMX channel of the selected
and
(4)
GB
11