Operating The Unit With The Keyboard; Text Mode - IMG STAGELINE LSX-300TEXT Manual De Instrucciones

to go to a different variant (character "/ " in
the following table) or to switch an effect
off (excluding the wave effect):
Key Text effect
All effects switched off
except mirroring (Key
Esc
Text runs* through the projection
area (character by character)
Flow
Select colour with or / colour
RGB
change*: entire text / character by
Color
character / within the characters
Text is constantly rewritten*;
Draw set text beginning with
Zoom*: big
small
Zoom
Text moves* around the X axis
forwards / backwards
X Move
Text moves* around the Y axis
upwards / downwards
Y Move
Text rotates* around the Y axis
to the right / to the left
Y Roll
Text rotates* around the X axis
X Roll forwards / backwards
Text rotates* around the Z axis
to the right / to the left
Z Roll
Wave effect
1 st press: set height of waves with
the key or
2 nd press: set number of waves with
Wave the key or
3 rd press: set speed with
the key or
further presses: as 1
Number of characters projected:
Text Qty
12 / 10 / 8 / 6 / 4
Duration of the projection of a text (in
seconds) for the function Loop Play-
back (key
Play time
Enter the duration with the numeric
keys, and then press the Enter key
to confirm.
Mirroring:
Mirror
* Set the speed with the keys and .

Text effects
Mirror)
and
small / small big /
➞ ➞
big
➞
st , 2 nd , 3 rd press
, refer to chapter 5.2.1):
/ / /
5) Once the text has been created, save the
text: Keep the key
and at the same time press a numeric key
for the storage location number (0 – 9). By
using the storage location numbers 0 – 9, it
is possible to save 10 different texts.
6) To delete all texts saved, press the keys
Save + No. ,
time.
5.2 Operating the unit
with the keyboard
1) Press the key
mode. "1. TEXT" will be projected.
2) Use the key or to select the mode:
1. TEXT = to enter or retrieve texts
2. AUTO = to run graphics of selectable
topics
3. MUSIC = to run graphics of selectable
topics by music control
4. CLOCK = to project time and date
5. COUNTDOWN = to run a countdown
3) Press the Enter key to call up the mode
selected.

5.2.1 TEXT mode

1) To project saved texts, keep the key
+ No pressed and at the same time press
the numeric key (0 – 9) to which the text
desired has been saved.
2) The text effects listed in table fig. 5 can be
switched on / off by means of the corre-
sponding keys. If there are effect variants,
press the corresponding key again to
select them.
3) To go to the text that has been saved to the
following or previous number, press the
⬆ ⬇
Pg UP or
key
projection when a number is selected to
which no text has been saved.
4) To project all saved texts one after the
other, press the button
Save + No pressed
Del at the same
and
to select the operating
▶
Pg DN . There will be no
Loop playback.
Play
15