Identification Data; Technical Description; Intended Use; Safety - bluematic SD 43 ORBITAL Manual De Uso Y Mantenimiento

For technical assistance or to request replacement parts, always give the model, the version and serial number written on the serial number
plate.
This device is designed for professional cleaning of hard and vinyl floors and carpets. The appropriate instructions must be followed when
operating the unit. The device may only be used for this purpose.
This device has been designed and built for cleaning carpets and
hard floors in industrial and industrial areas under proven safety
conditions by a qualified operator
The appliance is only suitable for use in indoor - or at least covered
- areas.
Operator cooperation is paramount for accident prevention. No
accident prevention programme can be effective without the full
co-operation of the operator who is directly responsible for machine
operation. The majority of occupational accidents that happen both
in the workplace or whilst moving are caused by failure to respect
The serial number plate is located on the lower part of the machine
chassis, and indicates the general characteristics of the appliance,
in particular the appliance's serial number. The serial number is a
very important piece of information and should always be provided
together with any request for assistance or when purchasing spare
parts.

TECHNICAL DATA

Working width
Number of orbit
Brush head motor rated power
Brush head motor nominal voltage
Brush head motor frequency
Maximum gradient with full load
Solution tank capacity
Rear wheels (diameter / width)
Appliance length
height of the appliance to the brush head carter
Height of the appliance to the shaft
Appliance width
Appliance service weight (without solution tank)
Sound pressure level (in compliance with IEC 704/1)
Uncertainty K
pA
Hand vibration level
Uncertainty of measurement of vibrations

IDENTIFICATION DATA

TECHNICAL DESCRIPTION

INTENDED USE

ATTENTION: The appliance is not suitable for use in the rain,
or under jets of water.

SAFETY

the most basic safety rules. An attentive, careful operator is most
effective guarantee against accidents and is fundamental in order to
implement any prevention programme.

SERIAL NUMBER PLATE

U/M
mm
orb./min
W
V
Hz
%
l
mm
mm
mm
mm
mm
kg
dB (A)
dB (A)
m/s
2
m/s
2
20
SD 43 ORBITAL
430
1400
1100
230
50/60
2
15
200/50
565
325
1160
450
41
<70
1.5
<2.5
1,5%