Unitekno C201A Instrucciones De Uso Y Mantenimiento página 11

WARNING!
Do not use this machine if there are
signs of damage (cracks, breaks), if
the power cord is damaged, or if you
suspect that there may be an internal
defect (for example, after the machine
has fallen).
If the power cord is damaged, a
manufacturer-authorised service
centre must replace it since a special
tool is needed to access it.
Read the rating-plate located under
the machine; make sure the voltage
and input ratings comply with the
system' s capacity.
Plug the machine into a grounded
outlet.
While moving the machine, avoid
tugging on the power cord.
Disconnect the machine from the
electrical power source by pulling the
plug. Do not disconnect it by pulling
on the cord, since this could damage
the machine.
Do not leave the machine unatten-
ded while it is plugged in.
Remove the power supply plug
from the socket after use and for
manteinance.
This appliance is not intended for
use by persons (including children)
with reduced physical, sensory or
lack of experience and knowledge
unless they have been given su-
pervision or instruction concerning
use of the appliance by a person
responsible for their safety.
Children should be supervised to
ensure that they do not play with the
appliance.
Do not attach devices that exceed
the indicated input rating to the
machine! Only use the machine's
original accessories, which are
guaranteed compatible by the
manufacturer.
This machine has been manufac-
tured for use in enclosed (covered)
areas.
Do not submerge the machine in
water!
Not for space heating purposes.
Do not point the steam
jet at persons or other
living beings. This machine produ-
ces high-temperature steam. Avoid
direct contact with the skin.
ATTENTION! danger of burning.
WARNING: danger of scalding.
Vapor must never be directed
toward equipment containing elec-
trical parts, like the inside of ovens.
Do not place any type of substance
(detergents or anything else) in the
steam generator if not specifically
approved by the manufacturer.
Before using the machine to clean
surfaces that may get damaged (e.g.
synthetic fibres, plastics, wood,
etc.), check their capacity to with-
stand high temperatures by doing
a trial run on a hidden area and by
carefully following manufacturer's
instructions.
Only use original replacement parts
for any necessary repairs. Please
see an authorised service centre.
Disconnect the equipment from the
electrical system before proceeding
with cleaning or maintenance
operations.
The aperture for cleaning the steam
generator must not be open during
use.
9