Operation; Energy Saving Tips - Domestic GROUP WAECO CoolFun SC26 Instrucciones De Uso

Operation

6 Operation
!
CAUTION! Health hazard!
Food may only be stored in its original packaging or in suitable
containers.
A
NOTICE! Risk of damage
 Ensure that the objects placed in the cooler are suitable for
cooling to the selected temperature.
 Ensure that food or liquids in glass containers are not
excessively refrigerated. Liquids expand when they freeze
and can therefore destroy the glass containers.
 Ensure that your cooler is well ventilated so that any heat
created can dissipate. Otherwise proper functioning cannot be
ensured. It is especially important not to cover the air vents.
I
NOTE
 Before starting your new cooling device for the first time, you
should clean it inside and outside with a damp cloth for
hygienic reasons (please also refer to the chapter "Cleaning
and maintenance" on page 29).
 A few water drops may form inside the cooler if it has been
cooling for a lengthy period. This is normal because the
moisture in the air condenses to water when the temperature
in the cooler falls. The cooler is not defective. Wipe it out with
a dry cloth if necessary.
 If the handle is folded back of if the cooler is being carried, the
lid is locked. You can only open the lid when the handle is
folded forwards.
6.1

Energy saving tips

 Choose a well ventilated installation location which is protected against
direct sunlight.
 If you want to set an increased energy efficiency and a limited cooling
capacity for the cooler device, use the device's ECO mode.
 Allow warm food to cool down first before placing it in the cooling device
to keep cool.
 Do not open the cooling device more often than necessary.
 Do not leave the cooling device open for longer than necessary.
26
CoolFun SC26, SCT26, SC30, SC38
EN