Starting Playback - Silvercrest KH 2302 Instrucciones De Uso

4.
To close the CD compartment, press the button
OPEN/CLOSE
once again.
In the display, the data (number of titles and
total playing time) on the CD is indicated.
Removing the CD
OPEN/CLOSE
• Press the button
compartment.
Remove the CD.

Starting playback

PLAY/PAUSE
• Press the button
Stopping the play function
STOP
• Press the button
Interrupting/continuing playback
• To interrupt playback, during playback press the
PLAY/PAUSE
button
. The indicator in the display
blinks.
• To continue playback, press the button
once again.
Next/previous title
• To jump to the next title of a CD during playback,
SKIP
press the button
• To return to the start of the title currently being
played, press the button
• To playback a previous title on the CD again,
briefly double-press the button
Title fast forward/reverse
• During playback, hold the button
pressed down.
• Keep this button pressed until the desired point in
the title has been reached.
Repeat function (REPEAT)
With the repeat function you can repeatedly play-
back indivdual titles of a CD or all of them.
• To repeat individual titles, press the button
In the display REPEAT1 is shown.
to open the CD
.
.
PLAY/PAUSE
.
SKIP
.
SKIP
.
SKIP
or
REPEAT
• To repeat all the titles on a CD press the button
REPEAT
twice.
In the display REPEAT ALL will appear.
• To end the repeats, press the button
nuously until the indicator REPEAT1/REPEAT ALL
extinguishes.
Playing titles in random order (RAND)
• On the remote control press the button
the display the indicator RANDOM appears.
Playback of the titles in random order starts im-
mediately.
Programme playing order
You can programme in the playing order in
which the titles of a CD are played back. For this,
64 programme locations are available.
This is only possible when the play function has
been stopped
1.
Press the button
In the display the programme location P--01 is
indicated, for the title that is to be played first.
2.
Select with the button
desired title for the programme location.
3.
To save the programming, press the button
MEM CLK-ADJ
To programme further titles, repeat the previously
described steps.
When all programme positions are occupied, the
indicator FULL appears in the display.
The programming is saved until you either remove
SKIP
the CD from the CD compartment, press the button
STOP
or switch the micro system off.
Starting the programmed title list.
1.
Start playback by pressing the button
PLAY/PAUSE
.
- 29 -
MEM CLK-ADJ PROG/MEM
or
SKIP SKIP
or
PROG/MEM
or .
.
REPEAT
conti-
RAND
. In
.
. the