Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
1. To inititate power, press and hold button for 5 seconds.
2. Click button to toggle between modes. Mode selection is indicated by
number of green light flashes:
•
Mode 1 (one flash) - Full darkness during inactivity. 1,000 lumen
brightness when motion is triggered until 10 seconds after motion
stops.
•
Mode 2 (two flashes) - 20 lumen brightness during inactivity. 1,000
lumen brightness when motion is triggered until 10 seconds after
motion stops.
•
Mode 3 (three flashes) - 20 lumen brightness constant illumination
(motion sensor disabled).
3. To shut off power, press and hold button for 5 seconds. Light will flash once.
4. Light will turn off at sunrise.
Wagan Tech and wagan.com are trademarks of Wagan Corporation.
User's Manual—Read before using this equipment
©2020 Wagan Corporation. All Rights Reserved.
2
Publicidad
Tabla de contenido
