Snom PA1 Guia De Inicio Rapido página 15

12. Device will save new settings and restart. When the start-up with the
network settings is complete, the red and the green LED will both be
glowing steadily.
13. Continue with "Logging on an account".
NOTE: Press the "IP/Reset" button briefl y to hear the current IP
Address of the snom PA1 (in English) over the connected
loudspeaker or in the headset.
L
OGGING ON AN ACCOUNT
This is the PA1's phone number you dial from a phone to make an an-
nouncement over the PA1's loudspeaker.
A
UTOMATICALLY
(recommended) by using the provisioning server. For more details on auto
provisioning snom devices see www.snom.com/wiki .
M
ANUALLY
1. In the menu on the left, click on "Identity 1" setup. The page
"Confi guration Identity 1" opens with the "Login" tab active.
2. Enter the data required by your network in the text fi elds:
a. Account: Name/phone number.
b. Password: Password for your account.
c. Registrar: Registrar address of your PBX software.
3. Click on "Save" and "Re-Register".
If the registration has been successful, the green "Call" LED will light up, the
red "Power" LED will turn off. Your snom PA1 is ready for operation.
snom PA1 Quick Start Guide
E
N
G
L
I
S
H
15