ci LOP G3 Guia Del Usuario página 11

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TROUBLESHOOTING
GUIDELINES
SYMPTOM
CHECKLIST
• Press the reverse button for at least 3 seconds
and press Start/Pause to operate it again.
1
Auger is clogged.
• Pull out the plug from the outlet, disassemble
the auger and drum, then clean the residue in the
mouth beneath the hopper.
• Make sure the appliance is preheated at least
1 minute.
Motor stopped and no
2
• Check whether the hopper and hopper lid is
oil extracted.
secure. The hopper will sit properly only when the
drum locker lever is at 'lock' icon.
• Check whether the protection cover has been
fully pushed down.
Motor works but no oil
• Empty the hopper, then disassemble the drum
3
extracted.
and auger. After cleaning them, assemble and
operate it again.
• Make sure the ingredients are in the hopper.
The appliance will stop and go in to protect mode
when it has been operated for more than 1 minute
without any ingredients.
4
Motor stopped.
• Check whether the ingredients are decreasing.
If not, stop the appliance, stir it and start again.
• Make sure the protection cover and the hopper
are in place.
• Make sure the drum locking lever is at
5
Hopper not in place
the 'lock' icon.
• Make sure the hexagonal shape of the drum and
Drum locking lever
auger is properly assembled to the housing.
6
stuck
• Completely disassemble the drum and auger,
then assemble them again.
• Check whether foreign substance has been mixed
with the ingredients.
7
Abnormal noise
• It could make noise when the ingredient is too big
or hard. Break down the big ingredients into small
pieces and refrain from extracting hard ingredients.
20
DEUTSCHE
1
INFORMATIONEN
2
WICHTIGE SICHERHEITSMASSNAHMEN
3
WARNUNG
4
EIGENSCHAFTEN
5
BETRIEBSVERFAHREN
6
RICHTLINIEN ZUR
FEHLERBEHEBUNG
21

Publicidad

Tabla de contenido
loading

Tabla de contenido