Setting The Temperature - Dometic FanTastic Vent Instrucciones De Montaje

FanTastic Vent
The remote control goes into standby mode to conserve the battery 30 seconds
after entering the last command. To activate the remote control, press any button on
the remote. The last temperature or speed setting before it goes into standby is
displayed. If the remote control is switched off manually with the
settings are reset.
8.2 Opening and closing the cover hood
➤ Briefly press the
✓ The cover hood opens.
➤ Briefly press the
✓ The cover hood closes.
8.3 Switching the fan on and off
The fan is fitted with a safety switch. You can only switch on the fan if the cover hood
is open.
➤ Open the window on the shady side of the caravan.
➤ Press the
button.
✓ The fan starts automatically.
➤ Press the
button.
✓ The fan switches itself off.
✓ The cover hood closes.
8.4

Setting the temperature

The temperature can be set at 13 levels. The set temperature is displayed with an LED
on the remote control in °F and °C (60 – 90 °F/15 – 33 °C). If two LEDs light up, the
temperature setting is in the middle between the illuminated values. (Example: If the
LEDs for 80 °F and 85 °F light up, the setting is at approx. 83 °F/28 °C).
➤ Press the
or
✓ The "Auto" LED lights up.
➤ Press the
button to increase the required temperature.
➤ Press the
button to decrease the required temperature.
EN
button.
button.
(temperature) button to change to the automatic mode.
Using the device (7350, 7300)
button, all the
19