auna Snozzer Manual De Instrucciones página 17

• The display now shows the current time and the alarm time with the hour digits flashing. Use FOR-
WARD / BACKWARD to change the hour and confirm (ENTER) - then repeat the routine for the minutes.
• Set the alarm frequency, using FORWARD / BACKWARD again to choose between „DAILY", „WEEK-
DAYS", „WEEKENDS" OR „ONCE". Confirm pressing ENTER.
• Proceed in the same way to choose the wake up mode (DAB+ / FM / BEEPER), confirm (ENTER) and
repeat the procedure for the wake up volume.
The alarm is now set and will remain in memory when the unit is switched to standby mode. When the time
on the clock is the same as the alarm time that has been set, the alarm will sound and the display will flash.
The alarm will continue to sound and stop automatically after one hour. To silence the alarm, press STAND-
BY. If a daily alarm has been set, the alarm indicator will remain illuminated and the alarm will sound again
at the same time the following day until the alarm is switched off.
To activate the snooze function, press the SNOOZE / SLEEP button when the alarm sounds. The snooze
indicator (Zz) will be shown in the display; the alarm will silence and then sound again after approximately
nine minutes.
To turn off the alarm permanently, press ALARM 1 to display the alarm status. Use FORWARD / BACKWARD
until „Alarm status OFF" is displayed, then press the ENTER button to accept and exit the mode. The alarm
has now been deactivated and the alarm indicator will no longer be shown in the display.
Please note:
• If the power is interrupted (or the unit is switched OFF using the rear switch) and batteries are not fitted
in the battery compartment, the alarm settings will be lost.
• To set the second alarm, use the ALARM 2 button and then follow the steps above to set this alarm.
• If the DAB+ or FM radio wake up option is selected the alarm will play the last station listened to in
DAB+ or FM.
With the radio of choice playing, press the SNOOZE / SLEEP button and the sleep status is shown in the
display. Press FORWARD / BACKWARD repeatedly until the desired sleep interval (OFF ... 10min ... 20min ...
... 90min) is shown in the display. Press ENTER to confirm. The sleep function will count down and the unit
will switch off automatically after the time interval selected has lapsed.
To cancel the sleep timer, press SNOOZE / SLEEP and then press FORWARD / BACKWARD repeatedly until
„OFF" is shown in the display. Press ENTER to accept.
Sleep-Timer
17