Bluetooth® - Mode; Bluetooth® Playback; Cleaning And Care - OK. OMH 460BT-B Manual De Instrucciones

BLUETOOTH® - MODE
This mode allows you to use the product as a speaker for an external device (e.g. mobile phone or MP3
player). The signal is transmitted wirelessly via Bluetooth®.
Hinweis:
Before playback, you must pair the product (in this case the Bluetooth® receiver) and the device
(transmitter). The Bluetooth® ID is OMH 460BT-B.
COMPATIBILITY
This product is compatible with Bluetooth® enabled mobile phones and music devices. It features
Bluetooth® version 2.1+EDR. It also works with devices featuring other Bluetooth® versions that support
e.g.
Wireless stereo listening
A2DP (Advanced Audio Distribution Profile)
Wireless music control
AVRCP (Audio/Video Remote Control Profile)
Note:
• Keep the range of 8 meter when pairing.
• Before pairing a Bluetooth® AV source, refer to the AV source user guide regarding safety instructions
and use with other devices.
BLUETOOTH® PLAYBACK
16 Turn ON the Bluetooth® connection on your Bluetooth®-player.
1. Select Bluetooth® mode (BT).
2. Connect your Bluetooth® player to the hi-fi system which is indicated as device OMH 460BT-B.
If OMH 460BT-B is not shown, perform a scan with your Bluetooth® player. A password is not
required for connection.
3. Once both devices are connected you can start playback at your Bluetooth® player.
4. In this mode the basic functions as play/pause
forward or rewind
Bluetooth® player to control the playback. Only the volume can be controlled by pushing
buttons VOL+/V+ or VOL-/V- at the hi-fi system or remote control.
5. To end stop the playback and turn off Bluetooth® connection at your Bluetooth® player.
AUX IN - MODE
17 Connect your music player and the hi-fi system by audio cable with 3.5 mm-stereo jacks.
1. Once both devices are connected you can start playback at your music player.
2. Use the controls of your mediaplayer to control the playback.
3. The volume can be controlled by pushing buttons VOL+/V+ or VOL-/V- at the hi-fi system or
remote control.

CLEANING AND CARE

• Disconnect the product from the power supply before cleaning it. Clean the product with a soft, damp
cloth and a mild cleaning agent. Finish by wiping it with a dry cloth. Do not use alcohol, acetone,
benzene, scouring cleansers etc. to clean the product. Do not use hard brushes or metal objects.
• Warning! Never immerse electrical parts of the product in water during cleaning or operation. Never
hold the product under running water.
• Warning! When cleaning, never use solvents or abrasive materials, hard brushes, metallic or sharp
objects. Solvents are harmful to human health and can attack plastic parts, while abrasive cleaning
mechanisms and tools may scratch the surface(s).
IM_OMH 460BT_A_171113_V05_HR.indb 19
19
or are not available at the hi-fi system. Use the controls of your
, skipping songs forward or back or fast-
EN
13/11/17 1:47 pm