Fagor PP-10 Manual De Instrucciones página 10

1. SPECIFICATIONS
Power supply/consumption:
100 - 240V - 20 - 25W / 50 -60Hz
Temperature max: 160ºC-180ºC
Interference suppression: this appliance
has interference suppression technology in
accordance with existing legislation.
Electromagnetic compatibility:
this appliance has been designed in
accordance with EMC (electromagnetic
compatibility) legislation
2. PARTS OF THE APPLIANCE
1. Plates.
2. ON/OFF switch.
3. Red ON/OFF light.
4. Locking cover.
5. Handle.
For your safety
The instructions for use contain
important safety instructions and the
necessary information for using the
appliance properly!
Please read the instructions thoroughly
and keep them in a safe place.
All the instructions for use are designed
for your own safety!
3. SAFETY INSTRUCTIONS FOR
PLUGGING IN THE APPLIANCE
• This appliance complies with the
technology standards and safety
legislation relating to electrical
appliances.
• Read this manual and keep it for future
reference to prevent any injury, damage
or danger resulting from incorrect use.
• After removing the packaging, check
that the appliance is in good condition.
EN
• To avoid harm or danger through
inappropriate use, the safety instructions
must be followed.
• If you give the appliance to someone
else, you must also give them the safety
instructions.
• If the power cable is damaged, it must
only be changed by a repair technician
recommended by the manufacturer or
by its technical service.
• The voltage of the power socket must
be the same as that specified on the
plate of the appliance.
• Do not place the cable on to sharp
surfaces, do not leave it hanging. Keep
the cable well away from hot or wet areas!
• Never insert any object or let anything
fall inside any opening.
• Before using the appliance, check that it
is working properly!
It must not be used if:
- The power cable is damaged
- The appliance is visibly damaged
- The appliance has been dropped.
• Never wind the power cable around the
appliance.
• The power cable must not come into
contact with hot parts of the appliance
and must not be placed between the
straightening plates.
• Make sure that the switch is in the OFF
position before plugging the appliance
into the mains supply.
• When unplugging, do not pull on the
cable.
Safety instructions for using the
appliance
• Always use the appliance for its
intended purpose!
• The appliance must not come into contact
with flammable materials. Neither must it
be used near flammable materials as the
straightening plates reach temperatures of
approx. 160 - 180 ºC!
• Never cover the styling plates with any
objects!
• Never switch the appliance on with
the plates closed. Make sure that you
remove the locking cover (4) before
plugging in the appliance or switching it
on!
9