Nyne NH-6500 Manual Del Usuario página 26

6
Press
on the top panel) repeatedly to
select your preferred alarm source.
7
A. If you have selected "BUZZ" as
the alarm source, press
set alarm timer directly.
B. If you have selected "iPod",
"FM", or "AM" as the alarm source,
press
on the top panel) repeatedly to
select the alarm volume, and then
press
timer.
C. If you have selected "DISC",
"USB", or "SD" as the alarm source,
press
on the top panel) repeatedly to
select the track to wake you up,
and then use the same keys to
select the alarm volume before
you press
alarm timer.
☞
The LED screen returns to normal
clock display.
To deactivate the alarm timer:
Select "OFF" at step 3 in the
above, and then press
Tips:
If you have selected dock, disc, USB
or SD as the alarm source but there
is no iPod/iPhone/iPad docked,
or no disc, USB or SD loaded at
the preset alarm time, you will be
woken up with the built-in buzzer
instead automatically.
26 EN
NYNE NH-6500_User Manual_A5.indb 26
) on the
on
) on the
) on the
to
During alarm timer setting, if there is
no operation within six seconds, the
current settings will be cancelled.
When the set alarm rings, you can
tap any button on the front panel
or press any button except
the remote control to snooze for an
interval of nine minutes.
When a set alarm rings, you can
press on the remote control to
stop alarm ringing. The set alarm will
ring again the next day.
If you have selected dock, disc, USB
or SD as the alarm source, when
the set alarm rings, you can remove
your iPod/iPhone/iPad, disc, USB,
or SD to stop alarm ringing. The set
alarm will ring again the next day.
on
5/19/2012 6:13:32 PM