RCA RT2781BE Manual De Usuario página 7

Connections and Setup
Better Surround Placement
Location
If possible, place surround speakers to either side of the listening area,
not behind it.
Height
If space permits, install surround speakers 2-3 feet above viewers. This
helps to minimize localization effects.
Aiming
Aim surround speakers straight across the room, not down at viewers, to
help create a more open, spacious surround sound field.
Courtesy Dolby Laboratories
Alternative Surround Placement
Rear wall
If rear wall mounting is the only choice, aim the speakers at each other
(A), towards the front (B) or towards the sidewalls (C, D).
Experiment with placement until sounds seem to surround you, rather
than come from behind you.
Courtesy Dolby Laboratories
No adjacent walls
Surround speakers can go on stands facing each other to approximate
sidewall mounting (A), or to the sides or rear of the viewing area, aimed
upwards; they can go right on the floor, or preferably, a few feet off the
floor such as on end tables (B).
Manufactured under license from Dolby
Laboratories.
Dolby, Pro Logic, and the double-D
symbol are registered trademarks of Dolby
Laboratories.
Dolby Digital
The Dolby Digital mode lets you enjoy full digital surround from
software processed in the Dolby Digital format. Dolby Digital provides
better sound quality and a more powerful presence than conventional
Dolby Surround. This unit is equipped with Dolby Digital 5.1-channel
so that you can enjoy enhanced full digital surround sound. The new
system provides stereo separation of the rear speakers (Rear-Right,
Rear-Left). Adding the subwoofer channel to the 5 channels for bass
sounds (counted as 0.1 channel) results in 5.1 channels (or 6 Channels)
that bring you the most sophisticated Dolby Digital sound enjoyment.
Playback via Bluetooth
devices
The unit can be paired and connected to the Bluetooth
devices such as a smart phone.
INITIAL DEVICE PAIRING AND CONNECTION
In order to pair and connect your Bluetooth
1. Press the button to turn on the unit.
2. Press SOURCE button or
the BT mode. Turn on the Bluetooth
connect.
3. On your Bluetooth ® enabled device, search for the "RT2781BE" in the
list of discovered devices and select it.
It may take the unit and Bluetooth
pair.
4. If it is successful, the front display of the main unit will show
"CONNECTED".
5. You can now enjoy audio from the unit.
Notes:
• If your Bluetooth device (e.g. Smart phone etc.) need the PIN code
while pairing, please enter 4-digit number: 0000.
• The unit can only be connected to one Bluetooth
RECONNECTING A BLUETOOTH
Bluetooth enabled devices must be reconnected when the device has
®
been turned off or the unit has been turned off.
1. Press the button to turn on the unit.
2. Press SOURCE button or
the BT mode. Turn on the Bluetooth
paired with the unit.
3. Depending on your Bluetooth device, your device may automatically
connect to the unit.
If the device does not automatically connect to the unit, then search
for the "RT2781BE" in its list of your Bluetooth
4. If it is successful, the front display of the main unit will show
"CONNECTED".
5. You can now enjoy audio from the unit.
PAIR AND CONNECT WITH ANOTHER NEW DEVICE
In order to pair the unit to a new device, you must first disconnect the
currently paired and connected Bluetooth
1. On the currently paired and connected Bluetooth
"RT2781BE" from the list of currently paired and connected devices,
and disconnect it. Please refer to your Bluetooth
User's Guide for direction on how to disconnect a device. Or turn off
the Bluetooth device.
®
2. Follow the Initial device pairing and connection instructions above.
- 5 -
enabled
®
® device for the first time:
button on the remote control to select
device you wish to pair and
®
® enabled device a few seconds to
device at a time.
®
ENABLED DEVICE
®
button on the remote control to select
® device that has already been
® devices and select it.
device from the unit.
®
device, select the
®
® enabled device
The Bluetooth word mark and logos are
®
registered trademarks owned by Bluetooth
SIG, Inc.
® enabled
EN