Cleaning And Care - Springlane Vinnie Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

disappear once the battery is charged.
2. Open a vacuum bag and put food in the bag. Make
sure that the bag is large enough and is filled at
most up to the marking below the adhesive valve.
3. Seal the vacuum bag by pressing together the two
seal strips with your fingers and make sure that the
bag is sealed well.
4. Make sure that no food or liquid gets under the
adhesive valve and place it on a level surface. For
liquids: Let the bag hang over the edge of a table
up to the marking so that the adhesive valve is on a
level surface.
5. Place the mini vacuum sealer Vinnie on the adhe-
sive valve so that the suction area is exactly in the
middle. Push the on/off button on the top of the
vacuum sealer - the vacuum process will begin. As
soon as the air is visibly sucked out of the bag, you
can let go of Vinnie. For liquids: Hold both the bag
that is hanging over the edge of the table and the
vacuum sealer throughout the process.
6. Make sure that no liquid is sucked in. As soon as no
more air is extracted from the bag, push the on/off
button again and remove the vacuum sealer.
7.
Seal the adhesive valve by pushing lightly on the
adhesive valve.

CLEANING AND CARE

Warning!
Always turn off the device before cleaning or care;
25

Publicidad

Tabla de contenido
loading

Tabla de contenido