Princess SILVER ICE CUBE MAKER Instrucciones De Uso página 7

The Ice Cube Maker can be switched on again straight away to prepare a new batch of ice cubes. If there
is no more water, the LCD flashes' Water Low'
with water and then press the ON/OFF button to continue the process.
If the ice cubes are left in the appliance they will gradually melt. The melt water will collect in the water
reservoir and then the ice cube maker will start to produce a new batch of ice cubes.
The machine can be stopped at any time by pushing the ON/OFF button. When the Ice Cube Maker is not
being used for an extended period, empty the water out of the reservoir and unplug the appliance.
USE TIMER
The inner timer enables you to specify when the appliance is turned on or off.
For example, the current time is 16:30. You want to turn on the appliance at 17:30 and turn off the
appliance at 19:30.
Setting time
Put the plug into wall socket,
once, '12' flashes for 5 seconds. During this time you can continuously push the adjust button ▲ to adjust
the hour from '12' to '16' which also flashes for 5 seconds. In these 5 seconds push the SET button again
and then '00' flashes. Use the adjust button ▲ to adjust the time in minutes '00' to '30'. After 5 seconds
without any symbol flashing on the display the current time has been set.
Push the SET button 3 times when you see
setting the clock time and you can use the SET button and adjust button to set your desired turn-on time
to 17:30.
Push the SET button 5 times when you see
setting the clock clock time, and you can use SET button and adjust button ▲ to set your desired turn-off
time to 19:30.
Use timer to turn on/off
Once the turn-on and turn-off time have been set, use the adjust button▲ to adjust to your desired settings
(auto turn on, auto turn off, auto-turn on and off).
Auto turn on setting: push the adjust button ▲ once, you can see
set. The appliance will turn on automatically at 17:30.
Auto turn off setting: push the adjust button ▲ twice, you can see
button to turn on the appliance. The appliance will turn off automatically at 19:30.
Auto turn on and off setting: push the adjust button ▲ 3 times, you can see
need to push ON/OFF button to turn on the appliance. According to the program you set the appliance
will turn on at 17:30 and turn off at 19:30 automatically.
Note: if you do not need the timer function, push the adjust button ▲ several times until only the symbol
and the current time are displayed on the LCD. Then use the ON/OFF button to operate the
appliance continuously.
CLEANING
Before cleaning, unplug the appliance from the electrical outlet. You should use a damp cloth to clean
both the interior and exterior of the appliance. Do not use any abrasives or solvents to clean the appliance.
Do not clean the appliance with detergent, either.
Do not leave water in the machine for an extended period. The water may become contaminated.
Use the valve on the back of the appliance to remove any excess water. It is advisable to
clean the machine regularly with an anti-algae and anti-bacterial agent. Follow the instructions
on the packaging.
It is advised to pour 1 tablespoon of lemon juice into the water reservoir each time you fill
the ice cube maker. The lemon juice running through the cooling system of ice cube maker
releases a fresh citrus smell throughout your home. The acid in the lemon juice will
combat the growth of bacteria, mould and airborne allergens. In addition, the lemon juice
aids in keeping the water flowing system much fresher in between cleanings.
and emits short beep sounds. Fill the water reservoir
12:00 is on the display (the default time is 12:00). Push SET button
'00:00' is on the display. Follow the above procedures for
'00:00' is on the display, Follow the above procedures for
on the display. Now the program is
on the display. Push the ON/OFF
on the display. Don't
7