Sears Craftsman 316.350851 Manual Del Operador página 9

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OIL AND FUEL MIXING
INSTRUCTIONS
Old and/or improperly mixed fuel are the main reasons for
the unit not running properly, Be sure to use fresh (less
than 60 days old) clean unleaded fuel. Follow the instruc-
tions carefully for the proper fuel/oil mixture.
Definition
of Blended
Fuels
Today's fuels are often a blend of gasoline and oxy_
genates such as ethanol, methanol, or MTBE (ether).
Alcohol-blended
fuel absorbs water. As little as 1% water
in the fuel can make fue! and oil separate and lead to for-
mation of acids during storage. When using alcohol-
blended fuel, use fresh fuel.
Using Blended
Fuels
If you choose to use a blended fuel, or its use is unavoid-
able, follow recommended
precautions:
• Always use the fresh fuel mix explained in this opera-
tor's manual
o Always shake the fuel mix before fueling the unit
• Drain the tank and run the engine dry before storing the
unit
• See Storing Chain Saw in Maintenance and Repair sec-
tion
To Obtain Correct Fuel Mix=
Thoroughly mix the proper ratio of 2-cycle engine oil with
unleaded gasoline in a separate fuel can. Use a 40:1
fuel/oil ratio. Do not mix them directly in the engine fuel
tank, See the table below for specific gas and oil mixing
ratios.
NOTE: One gallon (3.8 liters) of unleaded gasoline mixed
with one 3.2 oz. (95 ml.) bottle of
2-cycle oil makes a 40:1 fuel/oil ratio.
I
+
UNLEADED GAS
1 GALLON US
(3.8 LITERS)
1 LITER
MIXING RATIO - 40:1
2 CYCLE OIL
3.2 FL. OZ.
I95 ml)
25 ml
Using Fuel Additives
The bottle of 2-cycle oil that came with your' unit contains
a fuel additive which will help inhibit corrosion and mini-
mize the formation of gum deposits. It is recommended
that you use our 2-cycle oil with this unit.
If unavailable, use a good 2-cycle oil designed for
air-cooled engines along with a fuel additive, such as
STA-BIL ® Gas Stabilizer or an equivalent. Add 0.8 oz.
(23 ml.) of fuel additive per gallon of fuel according to the
instructions on the container. NEVER add fuel additives
directly to the unit's fuel tank.
WARNING:
Gasoline is extreme-
ly flammable.
Ignited
vapors may explode. Always stop the engine
and allow it to cool before filling the fuel
tank. Do not smoke while filling the tank.
Keep sparks and open flames at a distance
from the area.
_AIA
II:}ikll
kate_.
Remove fuel cap
vvo.._a lalanl,t,_,
slowly to avoid in ury
from fuel spray. Never operate the unit without
the fuel cap securely in place.
CAUTION"
For proper engine
[] operation
and maxi-
mum reliability,
pay strict attention
to the oil
and fuel mixing instructions
on the 2-cycle
oil containelt
Using improperly
mixed fuel
can severely damage the engine.
WARNING:
Add fuel in a clean,
well ventilated
out-
door area. Wipe up any spilled fuel immedi-
ately. Avoid creating a source of ignition for
spilled fuel. Do not start the engine until fuel
vapors dissipate.
NOTE= Dispose of the old fuel/oil mix in accordance to
Federal, State and Local regulations.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Craftsman 316.350220

Tabla de contenido