Tabla de contenido
Publicidad
Wiring Your Ultra Lite Speakers
Lighting Hook-Up From Rear
1
Recommended Fuse : 3A
Head unit
Audio Speaker
Wires + and -
Speaker
12 Volt DC
Input
Chassis
-
Ground
Ultra Lite Lighting
Input Terminals
NOTE: Must use 12 volt switched output ONLY.
3A
+
12 volt switched
+ DC source
Audio Input
Terminals
+
1. Do not connect an amplifier or any audio
source to Ultra Lite lighting inputs. Inputs are
designed for switched 12 volt DC power source
only. Do not connect your Ultra Lite product
directly to your batter y permanently, as it will
cause your batter y to discharge. Please use
a switched 12 volt source.
2. See fig. 1(illustrates wiring diagram) be sure
to maintain proper polarity. Be sure to connect
to a constant switched 12 volt source. Correct
connection would be the switched positive (+)
12 volt wire to the Positive (+) Ultra Lite light-
ing input terminal and connect the negative
(-) Ultra Lite lighting input terminal to a good
chassis ground.
Notice: There are no removable or ser viceable par ts on
the speaker. Tampering with the speaker or any of it's
components will damage the speaker and void the
warranty.
4
Publicidad
Tabla de contenido
