Cleaning & Care Information; Daily Product Inspection; Annual Product Inspection - Leckey Estilo Mariposa Manual Del Usuario

9 Cleaning & Care
Information
How to Maintain
When washing your denim Leeway Harness
for the first time, keep it separate from other
clothing items to avoid the natural process
of indigo bleeding.
This is an inherent quality of denim and only
adds to its unique charm.
Upholstery and fabrics
1. Before placing upholstery in to the
washing machine, remove any straps,
buckles and fastenings that are detachable.
Store these in a safe place and out of reach
of children.
2. Staining should be removed as quickly
as possible with absorbent cloth, towels or
a sponge. Routine soap and warm water
sponging is effective for ordinary soiling and
minor spills. Be careful not to saturate the
fabric as this will cause the stain to spread.
3. Antiseptic cleaning agents can be used
on more stubborn stains. These may require
a safe solvent such as Isopropyl Alcohol or
Mineral Spirit. Ensure that cleaning products
are fully removed.
4. Do not bleach the product.
5. While line drying is recommended, the
Leeway Harnesses can be tumble dried at a
low temperature.
6. You can use a warm iron on the
Leeway Harnesses.
7. Do not dry clean the Leeway Harnesses.
10 Daily Product
Inspection
(Therapists, Parents & Carers)
We recommend that daily visual checks of
the equipment are carried out by therapists,
carers or parents to ensure the product is
safe for use. The recommend daily checks
are detailed below.
1. Check all upholstery for signs of wear
and tear.
If in any doubt to the continued safe
use of your Leckey product or if any
parts should fail, please cease using
the product and contact our customer
services department or your local
dealer as soon as possible.
11 Annual Product
Inspection
(Therapist, Technician, Leckey Product
Advisor, Dealer)
Leckey recommend that each product should
be subject to a detailed inspection at least
once a year and every time the product is
reissued for use. This inspection should
be carried out by a technically competent
person who has been trained in the use of
the product and should include the following
checks as a minimum requirement.
1. Check all plastic buckles are in place and
replace any missing items.