Publicidad
A
DESCRIPTION
(starts at page 35
1
Upper handles
2
Fuel-enrichment pump
3
Fastening knobs for upper handles
4
Grass catcher
5
Oil filler cap
6
Oil drain plug
B
ASSEMBLY OF GRASS CATCHER (
C
ASSEMBLY REAR DEFLECTOR (
D
ASSEMBLY (
starts at page 36
MULCHING CAP INSERTION (
E
To cut the grass with the mulching system (no grass collection), lift the rear deflector panel and insert the cap by fixing it with the spring as shown in the figure.
F
ADJUSTMENT OF HANDLES HEIGHT (
G
ADJUSTMENT OF CUTTING HEIGHT (
SAFETY PRECAUTIONS (
H
l Always operate with the rear deflector or grass catcher in the correct position.
l Always stop the mower before removing the grass catcher or adjusting the height of cut.
l Never place your hands or feet underneath the deck or into the rear grass discharge chute while the mower is running.
(starts at page 37)
I
Before mowing, remove all foreign objects from the lawn which may be thrown by the machine. While mowing, stay alert for any foreign objects which may have been
missed.
Never lift the rear of the mower while starting or during normal operation.
(starts at page 37)
J
Never place your hands or feet underneath the deck or into the rear discharge chute while the mower is running.
OPERATION (
starts at page 37
K
ENGINE ADJUSTMENTS
Refer to the engine manufacturer's maintenance manual.
CAUTION:- 0.6l Oil must be added to the engine before use.
(starts at page 38)
L
STARTING THE ENGINE
Once the machine has been set up properly, start the engine as follows:
a) Engines with choke system:
when the engine is cold, position the accelerator lever (13) on START
b)Operate the engine stop lever (14) to prepare the engine for start, keep
lever pressed against handle while starting and using the machine - it operates
the engine brake.
M
(starts at page 38)
Keep the engine stop lever (14) depressed during machine operation. When
the lever is released, the engine stops.
MOWING
To cut the grass, push the lawn mower manually or insert the automatic
advance gear.
)
7
8
9
10
11
12
starts at page 35
)
starts at page 35
)
)
starts at page 37
starts at page 37
starts at page 37
)
starts at page 37
)
Deck
Adjusting levers for cutting height
Spark plug
Fuel cap
Engine start-grip
Rear deflector
)
Self-Propelled Lawnmower.
Remove the bail arms, attach cables as shown and re-fit the bail arms, if applicable.
Assemble the handle fit the levers with the pins and clips provided, assemble the
wheels as shown and throttle if supplied.
)
)
c) Engines with primer system:
Press the fuel-enrichment pump ( 2) located on the carburettor 3 or 4 times position
the accelerator lever (13) on MAX.
For further information and explanations, read carefully the user instruction manual of
the engine.
d) Start engine.
MANUAL STARTING: (While holding the engine stop lever (14)).
lHold the engine start-grip (11) and pull the starter rope gently until you feel the
resistance caused by compression. Return the starter rope slowly then pull the handle
firmly towards you to its full extent.
How to insert automatic advance: Lift up the clutch handle (17) and keep it pressed
in position.
CAUTION: Engage the gear only when the engine is running.
How to disengage advance: Release the clutch handle.
7
13
safety lever
14
Engine stop lever
15
Reduction gear
16
Console
17
Clutch lever
ENGLAND
Publicidad
