Alarm Clock; Battery Installation - BasicXL BXL-RC100 Manual De Uso

ENGLISH

Alarm clock

1. Battery installation:

Insert 4 AAA batteries with correct polarity (pic. 1).
(pic. 1)
2. Set time:
Pressing the "t" button will make the existing time flash on the screen. Press the "h" and "m" button to
increase hours and minutes until the time is correctly set. In order to quickly adjust the hours and
minutes, press the "h" or "m" buttons to leave the clock setup mode, then press the "t" button or until
the screen stops flashing. It will flash for three seconds when lit and flash for two seconds when unlit
(pic.2).
Press "t" (pic. 2) Press "h" and "m"
3. Alarm clock set:
Press the "a" button, when the clock time starts blinking, press the "h" and "m" to adjust hours and
minutes. To adjust the time faster, press the "h" or "m" button to leave the clock setup mode and press
the "a" button until the end of the screen flashing. It will flash three seconds when a lit and flash for two
seconds when until (pic. 3).
Press "a" (pic. 3) Press "h" and "m"
2