Warning: Do not use any mains power adaptor other than that
supplied, as using an alternative will increase the risk of injury
and/or damage to main product.
Care and Maintenance
Filter replacement and cleaning
1. Turn off the Cordless vacuum cleaner.
2. Press the dust bin release knob, remove the dust bin.
3. Take out the filter and empty the dirt inside.
4. Clean the filter in water, wait for it to dry completely.
5. Put the filter back into the dust bin carefully.
6. Put the dust bin back into the main body.
Rotating brush cleaning
1. Turn the floorhead upside down.
2. Turn the brush bottom screw to unlock position (see picture).
3. Open the brush bottom fixed device and remove the rotating brush from
the floorhead.
4. Clean the rotating brush. Has, for instance, hair been caught, use your
Instructions for use
English
7