Operation; Remote Control; Troubleshooting; Warranty - Dometic PERFECTVIEW VS 400N Instrucciones De Montaje

Operation

8 Operation
8.1

Remote control

Activating cameras
See fig. 3, page 3
➤ Press the C1 (1) button to activate camera 1.
➤ Press the C2 (2) button to activate camera 2.
➤ Press the C3 (3) button to activate camera 3.
➤ Press the C4 (4) button to activate camera 4.
Activating the split screen
➤ Press OK (fig. 3 5, page 3) to activate the selected split screen (fig. a 1 – 3, page 7).
Switching the device on or off
➤ Press OK (fig. 3 5, page 3) for more than 3 seconds to switch the device on or off (depend-
ing on the previous state).
9

Troubleshooting

Fault
The monitors remains black. Ensure that the monitor is switched on.
10

Warranty

The statutory warranty period applies. If the product is defective, please contact the
manufacturer's branch in your country (see the back of the instruction manual for the addresses) or
your retailer.
For repair and warranty processing, please include the following documents when you send in the
device:
• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault
16
Suggested remedy
Ensure that the control unit and the monitor share a power con-
nection.
VS400N
EN