Emc Directive - TDK-Lambda DRB120-1 Serie Manual De Instrucciones

PA634-04-01C
Note: CE MARKING
CE Marking, when applied to a product covered by this handbook indicates compliance with the following:
Low Voltage Directive in that it is complies with EN60950-1 and EN62368-1.

EMC Directive

Restriction of the use of certain Hazardous Substances Directive
2. Terminal Explanation
2-1. DRB120

+V: +Output terminal

- V: - Output terminal

V.ADJ: Output voltage adjust trimmer
The output voltage rises when trimmer is turned clockwise

L: AC Input terminal
Live line (fuse in line)

N: AC Input terminal
Neutral line

: Protective Earth
Connect to safety ground of apparatus or equipment.

DC OK : Green LED lights when Output
voltage is turn on and within specification

- DC : Optocoupler

+ OK : Optocoupler
WIRING
CONNECTOR Recommended Wire
INPUT
10~24 AWG
(L, N, ))
OUTPUT
10~24 AWG
(+V, -V)
OUTPUT
10~24 AWG
(DC OK)
Note: According to EN/UL60950-1 multi-
strand flexible cables connected to the input
require ferrule.
TDK-Lambda
DRB120 Series
INSTRUCTION MANUAL
Rated Torque
10.3 kgf.cm
(9 lbf.in)
10.3 kgf.cm
(9 lbf.in)
10.3 kgf.cm
(9 lbf.in)