Eco-De ECO-698 Manual De Instrucciones página 12

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
NOTE: TO ACTIVATE THE HOT AIR, THE WHEEL PLACED ON THE RIGHT OF THE
CONDITIONER SIDE MUST BE IN HORIZONTAL POSITION. HOT AIR ONLY HAS A FIXED
SPEED POSITION.
OPERATION INSTRUCTIONS
a) Pull the unit out of the carton and place it on a solid hot-proof horizontal surface.
b) Check if all the accesories are inside.
c) Take out the casters and the caster wrench. The casters with skid are for the two front
holes and the casters without skid are for the two back holes at the bottom of the unit.
(Fig. 1)
d) Pull upwards the water tank and add water. (Fig. 2)
Note:
The water level must stay between the MAX and MIN level line(Fig. 3)
It is recommended to change the water ans clean the water tank frequently.
e) Insert the plug pin into a wall socket and turn on the power switch, that is at the side
of the unit. You will hear a beep and the power indicator will be on.
Note:
For your safety, do not remove the plug with wet hands.
Unplug it, while moving the unit.
Make sure the unit is well connected.
MANTENANCE AND CLEANING
Note: After some time, the filtration mesh becomes clogged with dust and dirt,
which will certainly affect the unit's performance. It is recomended to clean it
frequently.
CLEANING THE FILTRATION MESH
1. Remove the plug from the wall outlet.
2. Pull the filtration mesh outwards (Fig. 4).
3. Clean the filtration mesh with mild detergent and a soft brush
4. Make sure the filtration mesh is completely dry before mounting it.
IMPORTADO POR ECOGEST TRADE S.L.
C.I.F.: B-97346225

Publicidad

Tabla de contenido
loading

Tabla de contenido