Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Publicidad
Resumen de contenidos para Teka TNF 450 INOX
- Página 31 INSTRUCTION MANUAL REFRIGERATOR TNF 450 INOX...
-
Página 32: Names Of The Components
Names of the components Apologizing for some features and accessories of the refrigerator you brought might not accord with the illustrations, refer to the packing list in the refrigerator please. Display control panel Please go through this manual before use. Thank you for purchasing our products. - Página 33 Correct application of the refrigerator Ensure that the refrigerator is placed correctly and stably. Be aware of all safety matters needing attention. Except the solutions recommended by the manufacturer, do not use mechanical ● 1.Connect the electricity equipment or other means to accelerate defrosting. Except the types recommended by the manufacturer, do not use electrical appliance After connecting electricity, it will enter into ex-factory state.
-
Página 34: Function Introduction
Function introduction All following functions must be worked under start state. High Humidity Mode ● When the system is not at High Humidity Mode, press and hold Hi Humidity key (A key) for three seconds to start the High Humidity Mode and High Humidity figure will be lit up. When the system is at High Humidity Mode, press and hold Hi Humidity key (A key) for three seconds to exit from the High Humidity Mode and High Humidity figure will not shine any more. - Página 35 Matters needing attention 8. High temperature warning of the cooling chamber When the temperature of the cooling chamber has been above 15℃ for six hours, high Do not arbitrarily dismantle Use standard professional three- temperature warning will ring. The buzzer will ring per second for ten times and then ten or repair.
- Página 36 Fingerprints are easily left on its exterior. Use a dry towel to wipe up. Periodically clean the dust both at the back of and under the refrigerator. Refrigerator interior should be cleaned frequently so as to avoid foreign odor. After the power is cut off, use soft towel and neutral Left cover plate detergent to clean and wipe with the clean water.
- Página 38 CONNECTING GUIDE for REFRIGERATOR AND FREEZER CABINETS 1 Step:Put two cabinets together with only 10mm gap. 2 Step: Fit the lower connecting hinge at the bottom of two cabinets. Fix the connecting hinge to the place as shown in the picture. 3 Step:Put the bar inside the gap between two cabinets.
- Página 39 Safety contents 1) This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.