Acoustic Warning Signal; Service And Maintenance - Festool BHC 18 Li Manual De Instrucciones Original

BHC 18
GB
9.1 On/Off switch [1-4]
Press = ON, release = OFF

The speed of the machine depends on how far
the on/off switch is pressed in.
9.2 Belt clip [1-6]
The belt clip (right/left) allows the user to attach
the machine briefly to work clothing.
9.3

Acoustic warning signal

Acoustic warning signals sound and the machine
switches off in the following operating states:
Battery low or machine overloaded:
peep

Change the battery

Reduce the machine load

10 Service and maintenance

WARNING
Risk of injury, electric shock

Always disconnect the battery pack from the
machine before any cleaning or maintenance!

All maintenance and repair work which requires
the motor housing to be opened, must only be
carried out by an authorised service workshop.
14
Customer service and repair only
through manufacturer or service
workshops: Please find the nearest
address at: www.festool.com/service
EKAT
Only use original Festool spare parts!
4
Order No. at: www.festool.com/service
5
3
2
1
Note the following information:
– Keep the ventilation slits on the machine free and
clean to ensure adequate cooling.
– Keep the contacts on the machine, charger and
battery pack clean.
For service, maintenance, disposal and
transport of the battery pack, note enclosed
instructions of the battery pack!
11 Environment
Do not dispose of the device in house-
hold waste! Recycle devices, accesso-
ries and packaging. Observe applica-
ble national regulations.
EU only: In accordance with European Directive on
waste electrical and electronic equipment and im-
plementation in national law, used electric power
tools must be collected separately and handed in
for environmentally friendly recycling.
Information on REACh: www.festool.com/reach